 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. WWW.CONWIN.COM PRODUCT D AT A SHEET CRYSTAL CONTROLLED OSCILLATORS STRATUM 3E 5V HCMOS OCXO ABSOLUTE MAXIMUM RATINGS PARAMETER Storage Temperature Supply Voltage UNITS (Vcc) MINIMUM -55 -0.5 NOMINAL MAXIMUM 100 7 UNITS C Vdc TABLE 2.0 (Fo) MINIMUM 3.2 -0.6 -10 -2 -100 -20 4.75 -1.0 -100 NOMINAL 5.00E-11 5.00 MAXIMUM 38.88 0.6 10 2 100 70 5.25 1.0 3.0 1.5 100 5 UNITS MHz ppm ppb ppb/day ppb RMS C Vdc ppb W W ppb ppb/G NOTE 1 2 I( W 0434 TABLE 1.0 NOTE OFC5EF3ABG5 32.000 MHz OPERATING SPECIFICATIONS PARAMETER Center Frequency Frequency Calibration Frequency Stability Aging: Daily Aging: First Year Aging: Short Term (1Sec.) Operating Temperature Range Supply Voltage Voltage Stability (+/-1%) Power Consumption: Turn On Power Consumption: Steady-State Warm Up 2G Tip-over OFC5EF3ABG5 DESCRIPTION 3 (Vcc) 4 5 6 7 The Connor-Winfield OFC5EF3ABG5 is a 5V Oven Controlled Crystal Oscillator (OCXO) with HCMOS output. The OFC5EF3ABG5 is designed for 3E applications requiring low jitter and tight frequency stability. HCMOS OUTPUT CHARACTERISTICS PARAMETER LOAD Voltage (High) (Low) Duty Cycle at 50% of Vcc Rise / Fall Time 10% to 90% Spurious Output Jitter (BW=10Hz to 20MHz) Period Jitter SSB Phase Noise at 1Hz offset SSB Phase Noise at 10Hz offset SSB Phase Noise at 100Hz offset SSB Phase Noise at 1KHz offset SSB Phase Noise at 10KHz offset SSB Phase Noise at 100KHz offset MINIMUM 12 4.2 45 NOMINAL 15 50 MAXIMUM 18 0.4 55 5 -100 2 2 -70 -100 -120 -140 -140 -140 UNITS pF Vdc Vdc % nS dBc ps rms ps rms dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz dBc/Hz TABLE 3.0 NOTE (Voh) (Vol) FEATURES FIXED FREQUENCY FREQUENCY STABILITY: 10ppb TEMPERATURE RANGE: -20 to 70C 5.0V OPERATION HCMOS OUTPUT HERMETICALLY SEALED PACKAGE RoHS 5/6 COMPLIANT PACKAGE CHARACTERISTICS Package TABLE 4.0 Metal package: resistive welded, grounded case, solder tinned pins . ORDERING INFORMATION Notes: 1) 2) 3) 4) 5) 6) 7) Initial calibration @ 25C, at time of shipment. Frequency vs. temperature stability, referenced to 25C Allen Variance: 1 second, 100 average. Frequency vs. change in supply voltage, referenced to 5.00 Vdc. Vcc = 5.0Vdc. Measured @ 25C. Measured @-20C, within 10 minutes, referenced one hour after turn-on. Cx101 07/27/06 OFC5EF3ABG5 OCXO SERIES - 32.000MHz CENTER FREQUENCY Specifications subject to change without notice. DATA SHEET #: PAGE 1 OF 2 REV: 01 DATE: aCopyright 2001 Connor-Winfield all rights reserved. THE CONNOR-WINFIELD CORP. 2111 COMPREHENSIVE DRIVE. AURORA, IL 60505. FAX (630) 851-5040. PHONE (630) 851-4722. WWW.CONWIN.COM PRODUCT D AT A SHEET CRYSTAL CONTROLLED OSCILLATORS ENVIRONMENTAL CHARACTERISTICS Temperature Cycle: Per MIL-STD-883, Method 1010, Condition B. -55C to 125C, 20 cycles,10 minute dwell, 1m inute transition. Gross Leak Test: Per MIL-STD-202, Method 112, Condition D. No bubbles in flourinert (FC-43) at 125C 5C for 20 seconds. SOLDERING Pin Solderability: Per MIL-STD-883, Method 2003. 8 hour steam age prior to 245C 5C Solder pot dip, 95% Coverage. Resistance to Solder Heat: Per MIL-STD-202, Method 210, Condition C. Wave: Topside board -mount product, 260C 5C for 20 Seconds. MECHANICAL CHARACTERISTICS Vibration: Per MIL-STD-202, Method 204, Condition A. 10G's peak, 10Hz to 500Hz, 15mi nute cycles 12 times each perpendicular axis. Shock: Per MIL-STD-202, Method 213, Condition D. 500G's, 1ms, half sine, 3 shocks per direction. Moisture Resistance: Per MIL-STD-202, Method 106. 95% RH @ 65C, 10 cycles 10C to 65C. TOP VIEW Temperature Solder Profile Ramp-Up Rate 3C/second max. from 150C to 225C. Ramp-Down Rate 6C/second max. I( W 0624 225C 183C 150C 100C 225C tp OFC5EF3ABG5 32 MHz 25C 0 60-120s Max. 360 Sec. Max. 10-30s 60-150s Max. Time Package Outline Pin Connections Pin 1 2 3 4 5 Connection Output Ground, Case N/C N/C Vcc Test Circuit Dimensional Tolerance: .005 (.127mm) Specifications subject to change without notice. DATA SHEET #: Cx101 PAGE 2 OF 2 REV: 01 DATE: 07/27/06 aCopyright 2001 Connor-Winfield all rights reserved. |
Price & Availability of OFC5EF3ABG5
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |